BHP+7 hp (9%)
Standard
80 hp
Tuned
87 hp
Torque+10 Nm (9%)
Standard
114 Nm
Tuned
124 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowFiat Punto 1.2i 16v 80hp ECU Remapping
Considering an ECU remap for your Fiat Punto 1.2i 16v 80hp? A Stage 1 remap can take this 2003-> petrol engine from 80 BHP to 87 BHP and from 114 Nm to 124 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Punto can achieve.
How this engine compares
- 15thof 17 Fiat Punto engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Punto 1.2i 16v 80hp is a 1.2L naturally aspirated petrol engine producing 80 BHP and 114 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 87 BHP and 124 Nm — a gain of around 7 BHP (9%) and 10 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Punto 2003-> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|