BHP+30 hp (9%)
Standard
350 hp
Tuned
380 hp
Torque+60 Nm (7%)
Standard
890 Nm
Tuned
950 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowDodge Ram 6.7 L6 350hp ECU Remapping
Considering an ECU remap for your Dodge Ram 6.7 L6 350hp? A Stage 1 remap can take this All diesel engine from 350 BHP to 380 BHP and from 890 Nm to 950 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Ram can achieve.
How this engine compares
- 3rdof 11 Dodge Ram engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dodge Ram 6.7 L6 350hp is a 6.7L turbocharged diesel engine producing 350 BHP and 890 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 380 BHP and 950 Nm — a gain of around 30 BHP (9%) and 60 Nm (7%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Ram All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|