BHP+20 hp (6%)
Standard
345 hp
Tuned
365 hp
Torque+20 Nm (4%)
Standard
540 Nm
Tuned
560 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowDodge Ram 5.7 V8 345hp ECU Remapping
Considering an ECU remap for your Dodge Ram 5.7 V8 345hp? A Stage 1 remap can take this All petrol engine from 345 BHP to 365 BHP and from 540 Nm to 560 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Ram can achieve.
How this engine compares
- 7thof 11 Dodge Ram engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dodge Ram 5.7 V8 345hp is a 5.7L naturally aspirated petrol engine producing 345 BHP and 540 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 365 BHP and 560 Nm — a gain of around 20 BHP (6%) and 20 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Ram All Engines
| Engine |
|---|