BHP+52 hp (14%)
Standard
360 hp
Tuned
412 hp
Torque+190 Nm (13%)
Standard
1450 Nm
Tuned
1640 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumDAF CF 360 ECU Remapping
Considering an ECU remap for your DAF CF 360? A Stage 1 remap can take this All diesel engine from 360 BHP to 412 BHP and from 1450 Nm to 1640 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your DAF CF can achieve.
How this engine compares
- 11thof 18 DAF CF engines by power gain
- 80%of the 9,842 engines we hold gain data for see a smaller power increase
- 95%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The DAF CF 360 is a naturally aspirated unknown fuel type engine producing 360 BHP and 1450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 412 BHP and 1640 Nm — a gain of around 52 BHP (14%) and 190 Nm (13%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other CF All Engines
| Engine |
|---|