BHP+35 hp (27%)
Standard
130 hp
Tuned
165 hp
Torque+70 Nm (25%)
Standard
280 Nm
Tuned
350 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighChevrolet Trax 1.7 VCDI 130hp ECU Remapping
Considering an ECU remap for your Chevrolet Trax 1.7 VCDI 130hp? A Stage 1 remap can take this 2013 -> diesel engine from 130 BHP to 165 BHP and from 280 Nm to 350 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Trax can achieve.
How this engine compares
- 2ndof 3 Chevrolet Trax engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Trax 1.7 VCDI 130hp is a 1.7L turbocharged diesel engine producing 130 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 350 Nm — a gain of around 35 BHP (27%) and 70 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Trax 2013 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.7 VCDI 110hp | 110 → 165 |