BHP+55 hp (50%)
Standard
110 hp
Tuned
165 hp
Torque+90 Nm (35%)
Standard
260 Nm
Tuned
350 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighChevrolet Trax 1.7 VCDI 110hp ECU Remapping
Considering an ECU remap for your Chevrolet Trax 1.7 VCDI 110hp? A Stage 1 remap can take this 2013 -> diesel engine from 110 BHP to 165 BHP and from 260 Nm to 350 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Trax can achieve.
How this engine compares
- 1stof 3 Chevrolet Trax engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Trax 1.7 VCDI 110hp is a 1.7L turbocharged diesel engine producing 110 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 350 Nm — a gain of around 55 BHP (50%) and 90 Nm (35%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Trax 2013 -> Engines
| Engine | BHP | Gain |
|---|