Chevrolet Trailblazer 4.2i 279hp Remap
Expected gains of +21 BHP and +22 Nm torque
Get Your Free Quote ↓BHP+21 hp (8%)
Standard
279 hp
Tuned
300 hp
Torque+22 Nm (6%)
Standard
373 Nm
Tuned
395 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Trailblazer 4.2i 279hp ECU Remapping
Considering an ECU remap for your Chevrolet Trailblazer 4.2i 279hp? A Stage 1 remap can take this All petrol engine from 279 BHP to 300 BHP and from 373 Nm to 395 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Trailblazer can achieve.
How this engine compares
- 3rdof 6 Chevrolet Trailblazer engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Trailblazer 4.2i 279hp is a 4.2L naturally aspirated petrol engine producing 279 BHP and 373 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 395 Nm — a gain of around 21 BHP (8%) and 22 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Trailblazer All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|