Chevrolet Trailblazer 3.6 V6 279hp Remap
Expected gains of +16 BHP and +20 Nm torque
Get Your Free Quote ↓BHP+16 hp (6%)
Standard
279 hp
Tuned
295 hp
Torque+20 Nm (6%)
Standard
350 Nm
Tuned
370 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Trailblazer 3.6 V6 279hp ECU Remapping
Considering an ECU remap for your Chevrolet Trailblazer 3.6 V6 279hp? A Stage 1 remap can take this All petrol engine from 279 BHP to 295 BHP and from 350 Nm to 370 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Trailblazer can achieve.
How this engine compares
- 6thof 6 Chevrolet Trailblazer engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Trailblazer 3.6 V6 279hp is a 3.6L naturally aspirated petrol engine producing 279 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 370 Nm — a gain of around 16 BHP (6%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Trailblazer All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|