BHP+20 hp (11%)
Standard
180 hp
Tuned
200 hp
Torque+20 Nm (6%)
Standard
325 Nm
Tuned
345 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowChevrolet S10 4.3 V6 180hp ECU Remapping
Considering an ECU remap for your Chevrolet S10 4.3 V6 180hp? A Stage 1 remap can take this 1997 - 2004 petrol engine from 180 BHP to 200 BHP and from 325 Nm to 345 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet S10 can achieve.
How this engine compares
- 2ndof 3 Chevrolet S10 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet S10 4.3 V6 180hp is a 4.3L naturally aspirated petrol engine producing 180 BHP and 325 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 345 Nm — a gain of around 20 BHP (11%) and 20 Nm (6%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other S10 1997 - 2004 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|