BHP+21 hp (7%)
Standard
304 hp
Tuned
325 hp
Torque+20 Nm (5%)
Standard
370 Nm
Tuned
390 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowCadillac CTS 3.6 V6 304hp ECU Remapping
Considering an ECU remap for your Cadillac CTS 3.6 V6 304hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 304 BHP to 325 BHP and from 370 Nm to 390 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac CTS can achieve.
How this engine compares
- 8thof 14 Cadillac CTS engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac CTS 3.6 V6 304hp is a 3.6L naturally aspirated petrol engine producing 304 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 325 BHP and 390 Nm — a gain of around 21 BHP (7%) and 20 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other CTS 2008 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|