BHP+27 hp (10%)
Standard
274 hp
Tuned
301 hp
Torque+29 Nm (10%)
Standard
302 Nm
Tuned
331 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowCadillac CTS 3.0 V6 274hp ECU Remapping
Considering an ECU remap for your Cadillac CTS 3.0 V6 274hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 274 BHP to 301 BHP and from 302 Nm to 331 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac CTS can achieve.
How this engine compares
- 4thof 14 Cadillac CTS engines by power gain
- 35%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac CTS 3.0 V6 274hp is a 3.0L naturally aspirated petrol engine producing 274 BHP and 302 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 301 BHP and 331 Nm — a gain of around 27 BHP (10%) and 29 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other CTS 2008 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|