BHP+30 hp (6%)
Standard
480 hp
Tuned
510 hp
Torque+60 Nm (10%)
Standard
600 Nm
Tuned
660 Nm
Suitability
Limited (3.5/10)Gains Profile
Torque-focusedHeadroom
LowCadillac ATS 3.6 V6 480hp ECU Remapping
Considering an ECU remap for your Cadillac ATS 3.6 V6 480hp? A Stage 1 remap can take this 2013 -> petrol engine from 480 BHP to 510 BHP and from 600 Nm to 660 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac ATS can achieve.
How this engine compares
- 1stof 5 Cadillac ATS engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac ATS 3.6 V6 480hp is a 3.6L naturally aspirated petrol engine producing 480 BHP and 600 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 510 BHP and 660 Nm — a gain of around 30 BHP (6%) and 60 Nm (10%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.