BHP+23 hp (11%)
Standard
202 hp
Tuned
225 hp
Torque+21 Nm (8%)
Standard
259 Nm
Tuned
280 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowCadillac ATS 2.5i - 202hp ECU Remapping
Considering an ECU remap for your Cadillac ATS 2.5i - 202hp? A Stage 1 remap can take this 2013 -> petrol engine from 202 BHP to 225 BHP and from 259 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac ATS can achieve.
How this engine compares
- 4thof 5 Cadillac ATS engines by power gain
- 26%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac ATS 2.5i - 202hp is a 2.5L naturally aspirated petrol engine producing 202 BHP and 259 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 280 Nm — a gain of around 23 BHP (11%) and 21 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other ATS 2013 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|