BHP+14 hp (5%)
Standard
286 hp
Tuned
300 hp
Torque+20 Nm (5%)
Standard
440 Nm
Tuned
460 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowBMW X5 4.4i 286hp ECU Remapping
Considering an ECU remap for your BMW X5 4.4i 286hp? A Stage 1 remap can take this E53 - 2000 - 2007 petrol engine from 286 BHP to 300 BHP and from 440 Nm to 460 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW X5 can achieve.
How this engine compares
- 44thof 46 BMW X5 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW X5 4.4i 286hp is a 4.4L naturally aspirated petrol engine producing 286 BHP and 440 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 460 Nm — a gain of around 14 BHP (5%) and 20 Nm (5%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other X5 E53 - 2000 - 2007 Engines
| Engine |
|---|