BHP+20 hp (10%)
Standard
200 hp
Tuned
220 hp
Torque+20 Nm (5%)
Standard
420 Nm
Tuned
440 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowBMW 5 Series 520D 200hp ECU Remapping
Considering an ECU remap for your BMW 5 Series 520D 200hp? A Stage 1 remap can take this F10/11 - 2010 - 2016 diesel engine from 200 BHP to 220 BHP and from 420 Nm to 440 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 5 Series can achieve.
How this engine compares
- 86thof 100 BMW 5 Series engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW 5 serie 520D 200hp is a 2.0L turbocharged diesel engine producing 200 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 440 Nm — a gain of around 20 BHP (10%) and 20 Nm (5%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch EDC17 (likely), and the transmission is many variants use zf 5/6-speed automatics (where fitted); manuals also exist..
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 5 Series F10/11 - 2010 - 2016 Engines
| Engine | BHP |
|---|