BHP+35 hp (23%)
Standard
150 hp
Tuned
185 hp
Torque+60 Nm (24%)
Standard
250 Nm
Tuned
310 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighAudi Q3 35 TFSI (1.5T) 150hp ECU Remapping
Considering an ECU remap for your Audi Q3 35 TFSI (1.5T) 150hp? A Stage 1 remap can take this F3 - 2019 -> petrol engine from 150 BHP to 185 BHP and from 250 Nm to 310 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q3 can achieve.
How this engine compares
- 20thof 24 Audi Q3 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi Q3 35 TFSI (1.5T) 150hp is a 1.5L turbocharged petrol engine producing 150 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 310 Nm — a gain of around 35 BHP (23%) and 60 Nm (24%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Q3 F3 - 2019 -> Engines
| Engine | BHP |
|---|