BHP+24 hp (21%)
Standard
116 hp
Tuned
140 hp
Torque+60 Nm (24%)
Standard
250 Nm
Tuned
310 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighAudi Q2 30 TDI (1.6D) 116hp ECU Remapping
Considering an ECU remap for your Audi Q2 30 TDI (1.6D) 116hp? A Stage 1 remap can take this 2019 -> diesel engine from 116 BHP to 140 BHP and from 250 Nm to 310 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q2 can achieve.
How this engine compares
- 9thof 12 Audi Q2 engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi Q2 30 TDI (1.6D) 116hp is a 1.6L turbocharged diesel engine producing 116 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 310 Nm — a gain of around 24 BHP (21%) and 60 Nm (24%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is a Bosch EDC17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Q2 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|