BHP+22 hp (12%)
Standard
190 hp
Tuned
212 hp
Torque+25 Nm (9%)
Standard
280 Nm
Tuned
305 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumAudi A6 2.8 FSI 190hp ECU Remapping
Considering an ECU remap for your Audi A6 2.8 FSI 190hp? A Stage 1 remap can take this C6 - 2008 - 2010 petrol engine from 190 BHP to 212 BHP and from 280 Nm to 305 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A6 can achieve.
How this engine compares
- 70thof 79 Audi A6 engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A6 2.8 FSI 190hp is a 2.8L naturally aspirated petrol engine producing 190 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 212 BHP and 305 Nm — a gain of around 22 BHP (12%) and 25 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED9/MED17 (varies), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other A6 C6 - 2008 - 2010 Engines
| Engine | BHP |
|---|