BHP+20 hp (8%)
Standard
265 hp
Tuned
285 hp
Torque+20 Nm (6%)
Standard
330 Nm
Tuned
350 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowAudi A5 3.2 FSI 265hp ECU Remapping
Considering an ECU remap for your Audi A5 3.2 FSI 265hp? A Stage 1 remap can take this MK1 - 2007 - 2011 petrol engine from 265 BHP to 285 BHP and from 330 Nm to 350 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A5 can achieve.
How this engine compares
- 52ndof 55 Audi A5 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A5 3.2 FSI 265hp is a 3.2L naturally aspirated petrol engine producing 265 BHP and 330 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 285 BHP and 350 Nm — a gain of around 20 BHP (8%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED9/MED17 (varies), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other A5 MK1 - 2007 - 2011 Engines
| Engine | BHP |
|---|