BHP+80 hp (36%)
Standard
220 hp
Tuned
300 hp
Torque+122 Nm (47%)
Standard
258 Nm
Tuned
380 Nm
Suitability
Excellent (8/10)Gains Profile
Torque-focusedHeadroom
HighAudi A3 2.0 TFSI 220hp ECU Remapping
Considering an ECU remap for your Audi A3 2.0 TFSI 220hp? A Stage 1 remap can take this 8V - Mk1 - 2012 - 2016 petrol engine from 220 BHP to 300 BHP and from 258 Nm to 380 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A3 can achieve.
How this engine compares
- 2ndof 71 Audi A3 engines by power gain
- 95%of the 9,842 engines we hold gain data for see a smaller power increase
- 89%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A3 2.0 TFSI 220hp is a 2.0L turbocharged petrol engine producing 220 BHP and 258 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 380 Nm — a gain of around 80 BHP (36%) and 122 Nm (47%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.