BHP+44 hp (17%)
Standard
256 hp
Tuned
300 hp
Torque+70 Nm (20%)
Standard
350 Nm
Tuned
420 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumAudi A1 2.0 TFSI 256hp ECU Remapping
Considering an ECU remap for your Audi A1 2.0 TFSI 256hp? A Stage 1 remap can take this 8X - 2010 - 2014 petrol engine from 256 BHP to 300 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A1 can achieve.
How this engine compares
- 10thof 24 Audi A1 engines by power gain
- 70%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A1 2.0 TFSI 256hp is a 2.0L turbocharged petrol engine producing 256 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 420 Nm — a gain of around 44 BHP (17%) and 70 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.