BHP+45 hp (13%)
Standard
350 hp
Tuned
395 hp
Torque+50 Nm (7%)
Standard
700 Nm
Tuned
750 Nm
Suitability
Moderate (5.5/10)Gains Profile
Power-focusedHeadroom
LowAlpina D3 D3 Bi-Turbo 350hp ECU Remapping
Considering an ECU remap for your Alpina D3 D3 Bi-Turbo 350hp? A Stage 1 remap can take this E90/91 - 2005 - 2013 diesel engine from 350 BHP to 395 BHP and from 700 Nm to 750 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina D3 can achieve.
How this engine compares
- 2ndof 5 Alpina D3 engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alpina D3 D3 Bi-Turbo 350hp is a 3.0L turbocharged diesel engine producing 350 BHP and 700 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 395 BHP and 750 Nm — a gain of around 45 BHP (13%) and 50 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.