BHP+51 hp (24%)
Standard
214 hp
Tuned
265 hp
Torque+30 Nm (7%)
Standard
450 Nm
Tuned
480 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumAlpina D3 2.0D 214hp ECU Remapping
Considering an ECU remap for your Alpina D3 2.0D 214hp? A Stage 1 remap can take this E90/91 - 2005 - 2013 diesel engine from 214 BHP to 265 BHP and from 450 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina D3 can achieve.
How this engine compares
- 1stof 5 Alpina D3 engines by power gain
- 80%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alpina D3 2.0D 214hp is a 2.0L turbocharged diesel engine producing 214 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 265 BHP and 480 Nm — a gain of around 51 BHP (24%) and 30 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.