Alfa Romeo MiTo 1.4 Multiair 170hp Remap
Expected gains of +15 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+15 hp (9%)
Standard
170 hp
Tuned
185 hp
Torque+50 Nm (20%)
Standard
250 Nm
Tuned
300 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumAlfa Romeo MiTo 1.4 Multiair 170hp ECU Remapping
Considering an ECU remap for your Alfa Romeo MiTo 1.4 Multiair 170hp? A Stage 1 remap can take this 2016 -> petrol engine from 170 BHP to 185 BHP and from 250 Nm to 300 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo MiTo can achieve.
How this engine compares
- 20thof 27 Alfa Romeo MiTo engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo MiTo 1.4 Multiair 170hp is a 1.4L turbocharged petrol engine producing 170 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 300 Nm — a gain of around 15 BHP (9%) and 50 Nm (20%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other MiTo 2016 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|