Alfa Romeo MiTo 1.4 Multiair 140hp Remap
Expected gains of +40 BHP and +55 Nm torque
Get Your Free Quote ↓BHP+40 hp (29%)
Standard
140 hp
Tuned
180 hp
Torque+55 Nm (24%)
Standard
230 Nm
Tuned
285 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighAlfa Romeo MiTo 1.4 Multiair 140hp ECU Remapping
Considering an ECU remap for your Alfa Romeo MiTo 1.4 Multiair 140hp? A Stage 1 remap can take this 2016 -> petrol engine from 140 BHP to 180 BHP and from 230 Nm to 285 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo MiTo can achieve.
How this engine compares
- 1stof 27 Alfa Romeo MiTo engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo MiTo 1.4 Multiair 140hp is a 1.4L turbocharged petrol engine producing 140 BHP and 230 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 285 Nm — a gain of around 40 BHP (29%) and 55 Nm (24%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other MiTo 2016 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|