BHP+5 hp (5%)
Standard
95 hp
Tuned
100 hp
Torque+10 Nm (8%)
Standard
120 Nm
Tuned
130 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowAlfa Romeo MiTo 1.4i 16v 95hp ECU Remapping
Considering an ECU remap for your Alfa Romeo MiTo 1.4i 16v 95hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 95 BHP to 100 BHP and from 120 Nm to 130 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo MiTo can achieve.
How this engine compares
- 25thof 27 Alfa Romeo MiTo engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo MiTo 1.4i 16v 95hp is a 1.4L naturally aspirated petrol engine producing 95 BHP and 120 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 130 Nm — a gain of around 5 BHP (5%) and 10 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other MiTo 2008 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|