BHP+35 hp (11%)
Standard
320 hp
Tuned
355 hp
Torque+80 Nm (20%)
Standard
400 Nm
Tuned
480 Nm
Suitability
Moderate (5/10)Gains Profile
Torque-focusedHeadroom
MediumVolvo XC90 2.0 T6 320hp ECU Remapping
Considering an ECU remap for your Volvo XC90 2.0 T6 320hp? A Stage 1 remap can take this 2014 - 2019 petrol engine from 320 BHP to 355 BHP and from 400 Nm to 480 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo XC90 can achieve.
How this engine compares
- 14thof 25 Volvo XC90 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volvo XC90 2.0 T6 320hp is a 2.0L naturally aspirated petrol engine producing 320 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 355 BHP and 480 Nm — a gain of around 35 BHP (11%) and 80 Nm (20%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.