Volvo XC60 2.0 D3 Polestar 163hp Remap
Expected gains of +62 BHP and +70 Nm torque
Get Your Free Quote ↓BHP+62 hp (38%)
Standard
163 hp
Tuned
225 hp
Torque+70 Nm (18%)
Standard
380 Nm
Tuned
450 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighVolvo XC60 2.0 D3 Polestar 163hp ECU Remapping
Considering an ECU remap for your Volvo XC60 2.0 D3 Polestar 163hp? A Stage 1 remap can take this 2013 - 2017 diesel engine from 163 BHP to 225 BHP and from 380 Nm to 450 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo XC60 can achieve.
How this engine compares
- 5thof 41 Volvo XC60 engines by power gain
- 88%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volvo XC60 2.0 D3 Polestar 163hp is a 2.0L turbocharged diesel engine producing 163 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 450 Nm — a gain of around 62 BHP (38%) and 70 Nm (18%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other XC60 2013 - 2017 Engines
| Engine | BHP | Gain | Torque |
|---|