BHP+5 hp (7%)
Standard
75 hp
Tuned
80 hp
Torque+5 Nm (5%)
Standard
95 Nm
Tuned
100 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowVolkswagen Polo 1.0i 75hp ECU Remapping
Considering an ECU remap for your Volkswagen Polo 1.0i 75hp? A Stage 1 remap can take this 2014 - 2017 ( 6C ) petrol engine from 75 BHP to 80 BHP and from 95 Nm to 100 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volkswagen Polo can achieve.
How this engine compares
- 57thof 57 Volkswagen Polo engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volkswagen Polo 1.0i 75hp is a 1.0L naturally aspirated petrol engine producing 75 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 80 BHP and 100 Nm — a gain of around 5 BHP (7%) and 5 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Polo 2014 - 2017 ( 6C ) Engines
| Engine | BHP | Gain |
|---|