BHP+20 hp (15%)
Standard
130 hp
Tuned
150 hp
Torque+50 Nm (17%)
Standard
300 Nm
Tuned
350 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumVolkswagen LT 2.8 TDI 130hp ECU Remapping
Considering an ECU remap for your Volkswagen LT 2.8 TDI 130hp? A Stage 1 remap can take this All diesel engine from 130 BHP to 150 BHP and from 300 Nm to 350 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volkswagen LT can achieve.
How this engine compares
- 4thof 5 Volkswagen LT engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volkswagen LT 2.8 TDI 130hp is a 2.8L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 350 Nm — a gain of around 20 BHP (15%) and 50 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other LT All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|