BHP+19 hp (7%)
Standard
280 hp
Tuned
299 hp
Torque+29 Nm (8%)
Standard
370 Nm
Tuned
399 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowVolkswagen Atlas 3.6 V6 280hp ECU Remapping
Considering an ECU remap for your Volkswagen Atlas 3.6 V6 280hp? A Stage 1 remap can take this 2017 - 2019 petrol engine from 280 BHP to 299 BHP and from 370 Nm to 399 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volkswagen Atlas can achieve.
How this engine compares
- 4thof 4 Volkswagen Atlas engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volkswagen Atlas 3.6 V6 280hp is a 3.6L naturally aspirated petrol engine producing 280 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 299 BHP and 399 Nm — a gain of around 19 BHP (7%) and 29 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Atlas 2017 - 2019 Engines
| Engine | BHP | Gain |
|---|