Vauxhall Insignia 2.0 CDTi 170hp Remap
Expected gains of +30 BHP and +30 Nm torque
Get Your Free Quote ↓BHP+30 hp (18%)
Standard
170 hp
Tuned
200 hp
Torque+30 Nm (8%)
Standard
400 Nm
Tuned
430 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumVauxhall Insignia 2.0 CDTi 170hp ECU Remapping
Considering an ECU remap for your Vauxhall Insignia 2.0 CDTi 170hp? A Stage 1 remap can take this 2013 - 2015 diesel engine from 170 BHP to 200 BHP and from 400 Nm to 430 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Insignia can achieve.
How this engine compares
- 21stof 41 Vauxhall Insignia engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Vauxhall Insignia 2.0 CDTi 170hp is a 2.0L turbocharged diesel engine producing 170 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 430 Nm — a gain of around 30 BHP (18%) and 30 Nm (8%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Insignia 2013 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|