BHP+35 hp (33%)
Standard
105 hp
Tuned
140 hp
Torque+70 Nm (24%)
Standard
290 Nm
Tuned
360 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighVauxhall Combo 1.6 CDTi 105hp ECU Remapping
Considering an ECU remap for your Vauxhall Combo 1.6 CDTi 105hp? A Stage 1 remap can take this (D) - 2012 - 2018 diesel engine from 105 BHP to 140 BHP and from 290 Nm to 360 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Combo can achieve.
How this engine compares
- 6thof 15 Vauxhall Combo engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Vauxhall Combo 1.6 CDTi 105hp is a 1.6L turbocharged diesel engine producing 105 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 360 Nm — a gain of around 35 BHP (33%) and 70 Nm (24%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Combo (D) - 2012 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.3 CDTi 90hp | 90 → 110 | +20 |