BHP+23 hp (8%)
Standard
278 hp
Tuned
301 hp
Torque+32 Nm (9%)
Standard
360 Nm
Tuned
392 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowToyota Tacoma 3.5 V6 278hp ECU Remapping
Considering an ECU remap for your Toyota Tacoma 3.5 V6 278hp? A Stage 1 remap can take this 2016 - 2023 petrol engine from 278 BHP to 301 BHP and from 360 Nm to 392 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Tacoma can achieve.
How this engine compares
- 3rdof 4 Toyota Tacoma engines by power gain
- 26%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Tacoma 3.5 V6 278hp is a 3.5L naturally aspirated petrol engine producing 278 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 301 BHP and 392 Nm — a gain of around 23 BHP (8%) and 32 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Tacoma 2016 - 2023 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|