BHP+28 hp (16%)
Standard
177 hp
Tuned
205 hp
Torque+60 Nm (15%)
Standard
400 Nm
Tuned
460 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumToyota ProAce 2.0 D-4D 177hp ECU Remapping
Considering an ECU remap for your Toyota ProAce 2.0 D-4D 177hp? A Stage 1 remap can take this 2020 -> diesel engine from 177 BHP to 205 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota ProAce can achieve.
How this engine compares
- 12thof 14 Toyota ProAce engines by power gain
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota ProAce 2.0 D-4D 177hp is a 2.0L turbocharged diesel engine producing 177 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 460 Nm — a gain of around 28 BHP (16%) and 60 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other ProAce 2020 -> Engines
| Engine | BHP | Gain |
|---|