BHP+25 hp (13%)
Standard
200 hp
Tuned
225 hp
Torque+50 Nm (10%)
Standard
500 Nm
Tuned
550 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumToyota Fortuner 2.8d 200hp ECU Remapping
Considering an ECU remap for your Toyota Fortuner 2.8d 200hp? A Stage 1 remap can take this 2020 -> diesel engine from 200 BHP to 225 BHP and from 500 Nm to 550 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Fortuner can achieve.
How this engine compares
- 4thof 5 Toyota Fortuner engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Fortuner 2.8d 200hp is a 2.8L turbocharged diesel engine producing 200 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 550 Nm — a gain of around 25 BHP (12%) and 50 Nm (10%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Fortuner 2020 -> Engines
| Engine | BHP | Gain |
|---|