Toyota Corolla 1.8 Hybrid 122hp Remap
Expected gains of +6 BHP and +18 Nm torque
Get Your Free Quote ↓BHP+6 hp (5%)
Standard
122 hp
Tuned
128 hp
Torque+18 Nm (13%)
Standard
142 Nm
Tuned
160 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowToyota Corolla 1.8 Hybrid 122hp ECU Remapping
Considering an ECU remap for your Toyota Corolla 1.8 Hybrid 122hp? A Stage 1 remap can take this 2019 -> petrol engine from 122 BHP to 128 BHP and from 142 Nm to 160 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Corolla can achieve.
How this engine compares
- 12thof 12 Toyota Corolla engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Corolla 1.8 Hybrid 122hp is a 1.8L naturally aspirated petrol engine producing 122 BHP and 142 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 128 BHP and 160 Nm — a gain of around 6 BHP (5%) and 18 Nm (13%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Corolla 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|