BHP+22 hp (13%)
Standard
170 hp
Tuned
192 hp
Torque+28 Nm (12%)
Standard
235 Nm
Tuned
263 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumToyota Alphard 2.4i 170hp ECU Remapping
Considering an ECU remap for your Toyota Alphard 2.4i 170hp? A Stage 1 remap can take this 2008 - 2015 petrol engine from 170 BHP to 192 BHP and from 235 Nm to 263 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Alphard can achieve.
How this engine compares
- 1stof 7 Toyota Alphard engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Alphard 2.4i 170hp is a 2.4L naturally aspirated petrol engine producing 170 BHP and 235 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 192 BHP and 263 Nm — a gain of around 22 BHP (13%) and 28 Nm (12%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Alphard 2008 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|