BHP+10 hp (11%)
Standard
90 hp
Tuned
100 hp
Torque+0 Nm (0%)
Standard
120 Nm
Tuned
120 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowSuzuki Swift 1.2 90hp ECU Remapping
Considering an ECU remap for your Suzuki Swift 1.2 90hp? A Stage 1 remap can take this 2017 -> petrol mhev engine from 90 BHP to 100 BHP and from 120 Nm to 120 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Suzuki Swift can achieve.
How this engine compares
- 7thof 10 Suzuki Swift engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Suzuki Swift 1.2 90hp is a 1.2L naturally aspirated petrol mhev engine producing 90 BHP and 120 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 120 Nm — a gain of around 10 BHP (11%) and 0 Nm (0%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Swift 2017 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|