BHP+10 hp (12%)
Standard
85 hp
Tuned
95 hp
Torque+15 Nm (14%)
Standard
110 Nm
Tuned
125 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumSuzuki Jimny 1.3i 85hp ECU Remapping
Considering an ECU remap for your Suzuki Jimny 1.3i 85hp? A Stage 1 remap can take this All petrol engine from 85 BHP to 95 BHP and from 110 Nm to 125 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Suzuki Jimny can achieve.
How this engine compares
- 4thof 4 Suzuki Jimny engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Suzuki Jimny 1.3i 85hp is a 1.3L naturally aspirated petrol engine producing 85 BHP and 110 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 95 BHP and 125 Nm — a gain of around 10 BHP (12%) and 15 Nm (14%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Jimny All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|