BHP+12 hp (8%)
Standard
156 hp
Tuned
168 hp
Torque+22 Nm (11%)
Standard
196 Nm
Tuned
218 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowSubaru XV 2.0i 156hp ECU Remapping
Considering an ECU remap for your Subaru XV 2.0i 156hp? A Stage 1 remap can take this 2017 -> petrol engine from 156 BHP to 168 BHP and from 196 Nm to 218 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru XV can achieve.
How this engine compares
- 3rdof 4 Subaru XV engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Subaru XV 2.0i 156hp is a 2.0L naturally aspirated petrol engine producing 156 BHP and 196 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 168 BHP and 218 Nm — a gain of around 12 BHP (8%) and 22 Nm (11%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other XV 2017 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|