BHP+30 hp (10%)
Standard
295 hp
Tuned
325 hp
Torque+60 Nm (15%)
Standard
400 Nm
Tuned
460 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumSubaru Liberty 2.0GT-S 295hp ECU Remapping
Considering an ECU remap for your Subaru Liberty 2.0GT-S 295hp? A Stage 1 remap can take this 2014 -> petrol engine from 295 BHP to 325 BHP and from 400 Nm to 460 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Liberty can achieve.
How this engine compares
- 1stof 2 Subaru Liberty engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Subaru Liberty 2.0GT-S 295hp is a 2.0L naturally aspirated petrol engine producing 295 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 325 BHP and 460 Nm — a gain of around 30 BHP (10%) and 60 Nm (15%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.