BHP+32 hp (12%)
Standard
268 hp
Tuned
300 hp
Torque+50 Nm (14%)
Standard
350 Nm
Tuned
400 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumSubaru Levorg 2.0 GT-S 268hp ECU Remapping
Considering an ECU remap for your Subaru Levorg 2.0 GT-S 268hp? A Stage 1 remap can take this 2015 - 2019 petrol engine from 268 BHP to 300 BHP and from 350 Nm to 400 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru Levorg can achieve.
How this engine compares
- 1stof 3 Subaru Levorg engines by power gain
- 51%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Subaru Levorg 2.0 GT-S 268hp is a 2.0L naturally aspirated petrol engine producing 268 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 400 Nm — a gain of around 32 BHP (12%) and 50 Nm (14%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Levorg 2015 - 2019 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|