BHP+15 hp (8%)
Standard
200 hp
Tuned
215 hp
Torque+15 Nm (7%)
Standard
205 Nm
Tuned
220 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowSubaru BRZ 2.0i 200hp ECU Remapping
Considering an ECU remap for your Subaru BRZ 2.0i 200hp? A Stage 1 remap can take this 2012 - 2016 petrol engine from 200 BHP to 215 BHP and from 205 Nm to 220 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Subaru BRZ can achieve.
How this engine compares
- 1stof 2 Subaru BRZ engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Subaru BRZ 2.0i 200hp is a 2.0L naturally aspirated petrol engine producing 200 BHP and 205 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 215 BHP and 220 Nm — a gain of around 15 BHP (8%) and 15 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Naturally Aspirated
- Displacement
- 2L