BHP+20 hp (12%)
Standard
165 hp
Tuned
185 hp
Torque+75 Nm (22%)
Standard
345 Nm
Tuned
420 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumSsangYong Kyron 270 XDi 165hp ECU Remapping
Considering an ECU remap for your SsangYong Kyron 270 XDi 165hp? A Stage 1 remap can take this All diesel engine from 165 BHP to 185 BHP and from 345 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong Kyron can achieve.
How this engine compares
- 2ndof 2 SsangYong Kyron engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 63%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The SsangYong Kyron 270 XDi 165hp is a 2.7L turbocharged diesel engine producing 165 BHP and 345 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 420 Nm — a gain of around 20 BHP (12%) and 75 Nm (22%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Kyron All Engines
| Engine | BHP | Gain |
|---|