Skoda Octavia 2.0 TDI CR 184hp Remap
Expected gains of +36 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+36 hp (20%)
Standard
184 hp
Tuned
220 hp
Torque+50 Nm (13%)
Standard
380 Nm
Tuned
430 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumSkoda Octavia 2.0 TDI CR 184hp ECU Remapping
Considering an ECU remap for your Skoda Octavia 2.0 TDI CR 184hp? A Stage 1 remap can take this 2017 - 2019 diesel engine from 184 BHP to 220 BHP and from 380 Nm to 430 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Skoda Octavia can achieve.
How this engine compares
- 32ndof 68 Skoda Octavia engines by power gain
- 60%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Skoda Octavia 2.0 TDI CR 184hp is a 2.0L turbocharged diesel engine producing 184 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 430 Nm — a gain of around 36 BHP (20%) and 50 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Octavia 2017 - 2019 Engines
| Engine | BHP | Gain | Torque |
|---|