BHP+20 hp (18%)
Standard
110 hp
Tuned
130 hp
Torque+40 Nm (20%)
Standard
200 Nm
Tuned
240 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumSkoda Fabia 1.0 TSI 110hp ECU Remapping
Considering an ECU remap for your Skoda Fabia 1.0 TSI 110hp? A Stage 1 remap can take this 2021 -> ... petrol engine from 110 BHP to 130 BHP and from 200 Nm to 240 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Skoda Fabia can achieve.
How this engine compares
- 23rdof 37 Skoda Fabia engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Skoda Fabia 1.0 TSI 110hp is a 1.0L turbocharged petrol engine producing 110 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 240 Nm — a gain of around 20 BHP (18%) and 40 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Fabia 2021 -> ... Engines
| Engine | BHP | Gain | Torque | Gain |
|---|