BHP+40 hp (20%)
Standard
200 hp
Tuned
240 hp
Torque+50 Nm (13%)
Standard
400 Nm
Tuned
450 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumSeat Tarraco 2.0 TDI 200hp ECU Remapping
Considering an ECU remap for your Seat Tarraco 2.0 TDI 200hp? A Stage 1 remap can take this 2019 -> diesel engine from 200 BHP to 240 BHP and from 400 Nm to 450 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Tarraco can achieve.
How this engine compares
- 4thof 8 Seat Tarraco engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Tarraco 2.0 TDI 200hp is a 2.0L turbocharged diesel engine producing 200 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 450 Nm — a gain of around 40 BHP (20%) and 50 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Tarraco 2019 -> Engines
| Engine | BHP | Gain | Torque |
|---|