BHP+10 hp (13%)
Standard
75 hp
Tuned
85 hp
Torque+10 Nm (11%)
Standard
95 Nm
Tuned
105 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumSeat Mii 1.0i 75hp ECU Remapping
Considering an ECU remap for your Seat Mii 1.0i 75hp? A Stage 1 remap can take this 2012 -> petrol engine from 75 BHP to 85 BHP and from 95 Nm to 105 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Mii can achieve.
How this engine compares
- 2ndof 2 Seat Mii engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Mii 1.0i 75hp is a 1.0L naturally aspirated petrol engine producing 75 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 85 BHP and 105 Nm — a gain of around 10 BHP (13%) and 10 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Mii 2012 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|