BHP+30 hp (20%)
Standard
150 hp
Tuned
180 hp
Torque+70 Nm (28%)
Standard
250 Nm
Tuned
320 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighSeat Leon 1.5 e-TSI 150hp ECU Remapping
Considering an ECU remap for your Seat Leon 1.5 e-TSI 150hp? A Stage 1 remap can take this KL - 2020 -> petrol mhev engine from 150 BHP to 180 BHP and from 250 Nm to 320 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Leon can achieve.
How this engine compares
- 44thof 73 Seat Leon engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Leon 1.5 e-TSI 150hp is a 1.5L turbocharged petrol mhev engine producing 150 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 320 Nm — a gain of around 30 BHP (20%) and 70 Nm (28%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Leon KL - 2020 -> Engines
| Engine | BHP | Gain | Torque |
|---|